Wellpoint Installation Bothasig covers shallow groundwater on the sandy low ground between the northern suburbs and the coast.
Bothasig sits closer to the West Coast sand belt than to the northern shale, which works in its favour.
Send your street and roughly how much lawn you water. Sizing follows from the yield.
Check Your Bothasig PropertyGround Conditions
Bothasig lies on the sandy low ground on the coastal side of the northern suburbs, closer in character to Milnerton than to the shale hills inland. Sandy formations with the water table within suction reach make this reasonable jetting territory.
Depths fall in the usual 6 to 12 metre range, and installations are generally straightforward compared with the more variable ground around Bellville and Durbanville.
Iron is worth mentioning. It occurs across the sandy aquifers on this side of the metro and shows up as orange staining on paving and pool surfaces rather than as any risk to the pump. It is treatable, but treatment should follow a test result rather than an assumption.
Services Available in Bothasig
Prices
| Item | Indicative range |
|---|---|
| Standard wellpoint installed with pump | R7,000 – R12,000 |
| No-water or dry-hole fee | R2,500 – R4,000 |
| Additional point, same visit | R2,500 – R5,000 |
| 1.1 – 1.5kW pump, supplied and fitted | R6,500 – R12,000 |
| Automatic controller with dry-run cut-out | R1,200 – R3,000 |
| Connection to existing irrigation | R1,500 – R4,500 |
| Sediment filtration | R1,800 – R4,500 |
| Irrigation-suitability water test | R450 – R1,200 |
| Annual service | R850 – R1,800 |
| Site assessment or call-out | R450 – R950 |
These are indicative Cape Town market ranges, not a quotation. Wellpoint pricing moves with depth, ground conditions, access and the pump specified, so treat these as a budgeting starting point and compare written quotes on what each one actually includes.
Ask what happens if no usable water is struck, whether the pump, controller and electrical connection are in the price, and what the guarantee covers.
Registration
Bothasig falls within the City of Cape Town, so the City's application and registration process applies, along with the national metering and record-keeping requirements and the by-law prohibiting interconnection with the municipal supply. Requirements change, so confirm the current position with the City before installing.
Also Covered Nearby
Installers quoting Bothasig generally also cover Edgemead, Milnerton, Monte Vista and Richwood. Full service detail for the wider network is on Wellpoint Installation Cape Town.
Related Services
Frequently Asked Questions
Is Bothasig suitable for a wellpoint?
Generally reasonable. Bothasig sits on sandy low ground closer in character to Milnerton than to the shale hills inland, which suits water jetting.
Why does Bothasig ground differ from Durbanville?
Bothasig is low and sandy on the coastal side of the northern suburbs; Durbanville is elevated clay and shale. Those are opposite conditions for a wellpoint.
Why is Bothasig wellpoint water staining my paving?
Dissolved iron oxidising on contact with air. It is common on the sandy aquifers this side of the metro, generally cosmetic at irrigation levels, and treatable once a test confirms the concentration.
How long does a Bothasig installation take?
The jetting is typically two to four hours on this ground. Allow a full day where the pump needs wiring and irrigation needs connecting.
Can a Bothasig wellpoint top up a pool?
Commonly, but test first. Iron will stain plaster and discolour the water when chlorine is added, and iron is realistic on this aquifer.
What pump suits a Bothasig garden?
Most domestic gardens run on a 0.55kW to 1.1kW self-priming jet pump, sized to the measured yield rather than to the size of the property.
Get a Bothasig Wellpoint Quote
Send your street and garden size, and Bothasig installers quote you directly.
Free to use, no obligation. Requests go to LEADERR APPROVED wellpoint installers working in Bothasig and the surrounding area.
Client Reviews
Powered by leaderr
